Durable resin (v2) simulating the properties of polypropylene (PP) is intended for products exposed to friction and wear. Thanks to its low modulus, high elongation and high impact strength, Durable resin prints are smooth, shiny and have good deformation strength. Use this material for applications that require minimal friction.

Packaging:

• 1000 ml

Soft tissue starter pack.

• Thanks to the Soft Tissue Kit, you can print elements imitating soft tissues. The material is used to print flexible gingival masks for use in conjunction with rigid dental models to aid in the planning of implant procedures. The Soft Tissue set consists of a flexible base resin (Flexible 80A) and pigments that allow you to obtain various degrees of color saturation, from dark to light pink shades. Magenta pigment, yellow pigment and white pigment can also be purchased separately.

Packaging:

• 1set

Light-cured resin, with ceramic filling for 3D printing. For the production of permanent crowns, inlays, onlays, veneers, prosthetic teeth and long-term temporary crowns and bridges. For DLP printers with a wavelength of 385 nm. Does not contain MMA and THF-MA. Class IIa medical device.

Advantages:

• Very high resistance to breakage and abrasion.
• Natural translucency and opaqueness.
• Easy to grind and polish.
• High biocompatibility.
• No discoloration thanks to low water absorption.
• Long-term color stability.
• Excellent bond with classic dental cements.

Physical data:

• Bending strength > 115 MPa.
• Elastic modulus > 2800 MPa.
• Final hardness > 50 Barcol.
• Water absorption at 40 g/mm3.
• Solubility 7.5 g/mm3.

Packaging:

• 500g

Model BioDent® 385 nm

The BioDent® model is a light-curing resin consisting of 50% renewable raw materials. The properties of the material are ideal for the production of models (also in Aligner). The FotoDent® bio-based model can be cleaned using the FotoClean program.

Advantages:

• less pollution in the atmosphere
• free of carcinogenic materials
• shorter cleaning times

Material data:

• Color beige opaque
• Modulus of elasticity ≥ 2200 MPa
• Viscosity ~ 0.6 Pa · s
• Bending strength ≥ 95 MPa

Packaging:

• 1 kg bottle.

Designed for crown and bridge models with replaceable dies. Dental Model Resin is a very precise resin with high accuracy.

Version 3:

• This version of Model Resin is a reformulation of the previous version.
• With the new V3 resin, you can print even more accurate models in half the time.
• Supports print resolutions: 100 and 50 microns.
• Requires Form 3 Resin Tank V2.1 or later for Form 3B and Form 2 Resin Tank LT for Form 2.

Packaging:

• 1l

Light-curing resin for the production of denture bases. The material provides accurate results with exceptional dimensional stability. The FotoDent® prosthesis is MMA free and has a stable color.

Material data:

• Final hardness 80 Shore D.
• Modulus of elasticity> 2000 MPa
• Bending strength> 80 MPa
• Viscosity 0.4-0.6 Pa · s
• Pink transparent color.

Packaging:

• 1 kg

The next-generation precision model printing resin, developed to take advantage of the new Form 4 ecosystem, is a high-accuracy material. Creates beautiful models with clear edges thanks to high opacity, beige color and smooth, matte finish.

Precision Model Resin is the next generation of model resin for the new Form 4 series of printers to print three times faster while offering improved accuracy and aesthetics.

Advantages:

• Prints eight models in just 90 minutes.
• 5-minute cycle in the washer.
• 5-minute hardening at room temperature.

Compared to Model Resin V3, Precision Model Resin is:

• Greater accuracy - better resolution and consistency of small elements.
• Speed - Designed to take advantage of the new Form 4 ecosystem for three times faster printing.
• A more opaque and matte aesthetic to better show off the edges.

Packaging:

• 1l

Light-curing, flexible resin for 3D printing. For making flexible splints, repositioners, mouth guards, splints and bite plates. Biocompatible. For DLP printers with a wavelength of 385 nm. Class IIa medical device.

Advantages:

• Very high wearing comfort.
• No stress.
• Long-lasting durability and stability.
• High impact resistance.
• Easy to maintain, clean and polish.
• No MMA, THF-MA and TPO.
• Odor and taste neutrality.

Physical data:

• Tensile strength > 40 MPa.
• Elongation > 20%.
• Tear strength > 140 N/mm.
• Final hardness > 75 Shore D.
• Water absorption < 32 µg/mm³.
• Solubility < 5 µg/mm³.

Packaging:

• 1000g

Light-curing, very flexible 3D printing resin. For making flexible splints, repositioners, mouth guards, splints and bite plates. Biocompatible. For DLP printers with a wavelength of 385 nm. Class IIa medical device.

Advantages:

• Very high wearing comfort.
• No stress.
• Long-lasting durability and stability.
• High impact resistance.
• Easy to maintain, clean and polish.
• No MMA, THF-MA and TPO.
• Odor and taste neutrality.

Physical data:

• Tensile strength > 25 MPa.
• Elongation > 50%.
• Tear strength > 110 N/mm.
• Final hardness > 65 Shore D.
• Water absorption < 32 µg/mm³.
• Solubility < 5 µg/mm³.

Packaging:

• 1000g

Light-curing, biocompatible resin for printing temporary crowns and bridges.

Advantages:

• Light spectrum 385 nm.
  • Exceptional resistance to cracking and bending.
  • High abrasion resistance.
  • Natural tooth aesthetics, shiny, translucent colors.
  • Easy surface treatment and polishing, which can be characterized individually with composites.
  • Low viscosity ensures low material consumption and faster cleaning.
  • Resistant to conditions in the oral cavity, no odor and taste irritation.
  • Class IIa medical device.
  • Colours: A1, A2, A3.

Packaging:

• 500g

Light-curing, biocompatible resin for 3D printing, for the production of implant guides, transfer keys and occlusal splints.

Advantages:

• Light spectrum 385 nm.
• Transparent formula for visual control in the workspace.
• Process reliability due to high initial hardness and final strength.
• Low viscosity ensures low material consumption and faster cleaning.
• The highest mechanical resistance to bending and cracking.
• Odor and taste neutral.
• Class IIa medical device,
• Colour: transparent.

Packaging:

• 500g

Light-curing resin for 3D printing for dental models.

Advantages:

• For DLP printers with a wavelength of 385 nm.
• Maximum surface hardness and dimensional stability ensure excellent mechanical load capacity.
• Faster workflow without drying process.
• Maximum design precision, feel and stability meet the high demands of model production.
• Optimum edge strength ensures reliable models.
• Colors: sand, light grey, caramel, white.

Physical data:

• Flexural strength > 80 MPa;
• Elastic modulus > 1700 MPa;
• Final hardness > 80 Shore D.

Packaging:

• 1000g

Light-cured 3D resin for producing precise casting objects (skeletons).

Advantages:

• For all UV printers with a light spectrum of 385 nm.
• Excellent dimensional stability after printing ensures safe application with fit control, especially for cast models and molds.
• Printing results are precise and distortion-free, even for extremely delicate and complex models.
• Any corrections or repairs after printing are possible using easyform gel LC.
• Low viscosity and optimized cure depth help reduce printing time and material consumption and facilitate faster cleaning.
• It burns without leaving any residue in the mold and is the basis for high-quality modeling results that ensure a perfect fit.
• Red colour

Packaging:

• 500g or 1000g

Light-curing resin for printing thermoelastic, therapeutic dental splints.

Indications:

• Therapeutic splints.

• Diagnostic auxiliary and functional elements.

• Teeth whitening trays.

• Palatal plates.

Advantages:

• High flexibility and abrasion resistance - exceptional break resistance and durability.

• Excellent comfort of use, the material is thermoelastic and tasteless and odorless.

• Transparent – for making rails that are almost invisible.

• Easy to polish.

• Biocompatible.

• Class IIa medical device.

Packaging:

• 1000g

Light-curing resin for printing removable denture plates.

Indications:

• Removable denture plates

Advantages:

• Class IIa medical device

• Comfort of wearing the prosthesis – thanks to precision of workmanship and perfect fit.

• High aesthetics – natural gingival color.

• Compatibility – use with available lining materials.

• Safe removal from build platform.

• Patient acceptance - no taste or smell.

• Biocompatibility.

Packaging:

• 1000g

Light-curing resin for the production of trial prosthetic restorations.

Indications:

• Trial full and partial dentures.

• Transfer and sanding templates.

• Corrective and occlusal impressions.

Advantages:

• Preliminary inspection before making the final prosthesis - checking and, if necessary, adjustment and correction of occlusion, function, pronunciation and aesthetics.

Packaging:

• 1000g

BioMed Durable Resin is a transparent material for biocompatible applications requiring impact, shatter and abrasion resistance.

This USP Class VI material is manufactured in an FDA, ISO 13485 registered facility and can be used in long-term skin contact and short-term tissue, bone and dentin contact applications.

Resin dedicated to Form 3B series 3D printers. is compatible with the Form 3B, Form 3B+ and Form 3BL models and can be used in medical facilities for the production of devices and instrumentation as well as in dental and orthodontic laboratories.

To ensure that physicians and manufacturers can rely on this new material for patient contact, Formlabs has closely followed USP Class VI procedures to obtain certification for use in long-term skin applications (over 30 days) and short-term tissue, bone and dentin contact applications (less than than 24 hours). Formlabs' manufacturing facility meets the requirements of the ISO 13485 standard and strict quality control measures are rigorously enforced.

Technical data:

• Highest tensile strength - 29.1 MPa.
• Modulus of elasticity - .99 GPa.
• Elongation at break - 33%
• Impact resistance (Notched Izod) - 98 J/m.

Packaging:

• 1 liter

Formlabs resin pump.

The resin pumping system for Form 3 series stereolithography (SLA) 3D printers smoothly delivers resin from a 5 liter resin package through the pumping system directly to the printer tank. Reduce waste by 86%.

Packaging:

• 1 piece

Biocompatible Class I resin, for orthodontic applications.

Digitally designed transfer splints enable precise transfer of several brackets to an ideal, virtually pre-determined position on the teeth. This allows not only for more accurate placement, but also for a more effective treatment procedure.

Indications:

• Orthodontic transfer splints for installing brackets.

Advantages:

• Easy to use.
• The translucent V-Print IBT is flexible and allows for easy application and removal of the splint in the patient's mouth.
• No shaking - ready for immediate use.
• Virtually planned brackets are precise, glued safely and faster.

Packaging:

• 1000g

Light-curing resin for the production of therapeutic splints.

Indications:

• Medicinal splints.
• Auxiliary parts and functional parts for diagnosis.
• Whitening trays.

Advantages:

• Class IIa medical device.
• Biocompatibility and neutral taste ensure a high level of patient acceptance.
• The wavelength of 385 nm allows for aesthetic, clear and transparent printing.
• High bending strength.
• High precision and, consequently, accurate fit ensure high wearing comfort.

Packaging:

• 1000g

Light-curing resin for the generative production of individual trays, base plates and occlusal templates.

Indications:

• Individual impression trays, functional impression trays.
• Occlusal template plates and trial dentures.
• Short circuit registration.

Advantages:

• Time savings - ability to print with high layer thicknesses (up to 200 µm).
• Impressions free from distortions – thanks to high durability.
• Universal – suitable for all types of impression materials.
• Speed and efficiency – printing various elements, e.g. shaping the margins, making retention elements or recesses for implant impressions.

Packaging:

• 1000g

The multi-purpose SIMPLEX filament provides a natural surface effect thanks to the high content of hard gypsum. It offers high detail reproduction. It promotes pleasant work because it does not contain irritating ingredients. It does not produce unpleasant fumes during the printing process and is recyclable and industrially compostable. It can be easily prepared using rotary instruments or a scalpel. Printing temperature: 205-220°C

Data:

• Gypsum fiber Ø 1.75 mm
• 1 x 800 g
• White color

The special SIMPLEX aligner filament is adapted to the special requirements of aligner production and thermoforming techniques. It promotes pleasant work because it does not contain irritating ingredients. It does not emit unpleasant fumes during the printing process. No post-processing, no annealing. Printing temperature: 235-255°C

Details:

• Heat-resistant special filament Ø 1.75 mm,
• 1 x 800 g
• White color

Packaging:

• 1 piece

• SIMPLEX filament for working models, provides high detail.
• It promotes pleasant work because it does not contain irritating ingredients.
• Does not produce unpleasant fumes during the printing process,
• Suitable for recycling and industrial composting.
• Printing temperature: 190-230°C

Details:

• Biofilament Ø 1.75 mm,
• 1 x 800 g,
• green color

The filament for the demonstration model made of SIMPLEX biofibers offers high detail reproduction and sharpness of diagnostic models. It promotes pleasant work because it does not contain irritating ingredients. It does not produce unpleasant fumes during the printing process and is recyclable and industrially compostable. Printing temperature: 190-230°C

Details:

• Biofilament Ø 1.75 mm,
• 1 x 800 g,
• White color

Packaging:

• 1 piece

F80 is a soft and flexible resin, pink in color, particularly suitable for creating models of dental gums. F80 resin can maintain its softness even at lower temperatures.

Advantages:

• F80 resin prints have a Shore hardness of 50-60A, are soft to the touch and flexible.
• F80 resin prints are characterized by good elasticity and quickly regain their shape after deformation.
• Even at temperatures below 10°C, F80 prints remain soft, although their flexibility decreases as the temperature drops.
• F80 resin is suitable for all popular LCD/MSLA/DLP 3D printers on the market, including RGB or monochrome printers.
• Printer Compatibility - All series of Anycubic, Asiga, Solus, Miicraft, Kudo3d, Flashforge, Makex, Shining etc. 385-410nm DLP UV resin 3D printer.

Mechanical properties:

• ASTM Shore Hardness: D2240-05 50-60A.
• Tensile strength ASTM: D638-14 3.8 MPa.
• Tear strength ASTM: D624-98 9.75 KN/m.
• Elongation at break ASTM: D638-14 159%.
• Viscosity (25℃) ASTM: D4212-10 2300mpa.s.

Manufacturer's recommendations:

• If the resin will not be used in the 3D printer for more than 1 day, it is recommended to filter the resin using a funnel with a filter and pour it into an empty container. Do not pour the resin from the tank back into the original bottle to avoid contamination with other resins.

Packaging:

• 500g

Light-curing resin for printing elements fired during casting and pressing.

Indications:

• Production of elements that are completely removed from the mold before the casting or pressing process, leaving no residues.

Advantages:

• Repeatable – simple duplication before casting.

• Fast finishing, precision.

• Printed elements guarantee high quality reproduction.

• High dimensional stability and edge strength - safe checking of occlusion and lateral movements.

• Excellent compatibility – the resin can be used with available refractory compounds.

Packaging:

• 1000g

Light-curing resin for printing dental models.

NO SHAKE – ALWAYS HOMOGENEOUS!

Indications:

• Working and demonstration models.

Advantages:

• Speed and accuracy – optimal adjustment even with layers 100 μm thick.

• Safe machining – no undesirable surface changes (e.g. caused by increased tool temperature).

• Surface resistance to scratches - high hardness allows optimal adjustment of prosthetic restorations without their deformation.

• The product can be used in thermoforming devices - precise work, obtaining models for overlays and retainers.

Packaging:

• 1000g or 5000g

C01 is a transparent, green resin intended for use in dentistry.

• It is mainly used for casting nickel-chromium and cobalt-chromium alloys.
• C01 ensures high precision in both form and dimensions, it is the ideal choice for the production of crowns, bridges and frames that ensure a perfect fit every time.
• The excellent fluidity of this resin speeds up the 3D printing process and ensures prints with clear details and high shape accuracy.
• Additionally, C01 resin has high stiffness and does not require additional hardening, which saves time.
• Prints also do not require thick supports, and the supports can be easily removed, leaving no pits on the surface and reducing manual sanding time.

Advantages:

• The C01 resin has been specially designed for dental applications and is suitable for centrifugal casting at 900°C without residue.
• High precision, whether in terms of shape accuracy or dimensional accuracy, the cast crown, bridge or framework will fit perfectly into the patient's mouth.
• Excellent fluidity, the viscosity of the resin is only 100 mpa.s, which is close to the fluidity of water, accelerates the speed of 3D printing. And the low viscosity features make the details of prints clearer and the shape accuracy higher.
• It does not require additional hardening, it has high stiffness when first formed, the surface of the printed part does not stick after washing, so it does not require additional hardening, which saves time.
• The supports can be easily removed, the appropriate mechanical properties mean that C01 prints do not require too thick supports, so the supports can be easily removed, leaving no pits on the surface, saving manual sanding time.

Mechanical properties:

• Viscosity (25℃) ASTM: D4212-10 100mpa.s
• ASTM Shore Hardness: D2240-05 78D
• Tensile strength ASTM: D638-14 26MPa
• Elongation at Break ASTM: D638-14 4.50%
• Bending strength ASTM: D790-10 39MPa
• ASTM modulus of elasticity: D790-10 400MPa

Packaging:

• 1 kg

Light-curing resin for printing dental surgical templates.

Indications:

• Dental surgical templates

Advantages:

• Class IIa medical device.

• Perfectly accepted by patients - tasteless and odorless.

• Optimal patient safety.

• The templates can be sterilized in an autoclave at 134°C for 5 minutes.

• Dimensional stability – perfect fit, even after autoclaving.

• Biocompatibility.

Packaging:

• 1000g

Formlabs' fastest resin, prints at a speed of over 100 mm per hour. It allows you to print models in minutes or large prototypes in less than two hours.

Compatible with Form 4, Form 4B, Resin Tank Form 4, Form 4 Build Platform, Form 4 Build Platform Flex.

Application:

• Prosthetic models.
• Orthodontic models.

Color:

• Gray

Advantages:

• Fast Model is the next generation of Draft Resin, designed to take advantage of the new Form 4 ecosystem.
• Faster - Designed to take advantage of the new Form 4 ecosystem for printing three times faster.
• Stronger and stiffer - 45% higher strength and elastic modulus.
• More opaque and matte color.

Mechanical properties of Fast Model resin:

Cure at room temperature for 5 minutes:

• Final tensile strength 55 MPa
• Tensile modulus 2500 MPa
• Elongation at break 15%
• Bending strength 98 MPa
• Modulus of elasticity 2600 MPa
• Notched isode 30 J/m
• Thermal deflection temperature at 0.45 MPa 58 °C

Additional hardening at 60 °C for 15 minutes:

• Final tensile strength 62 MPa
• Tensile modulus 2700 MPa
• Elongation at break 11%
• Bending strength 106 MPa
• Modulus of elasticity 2700 MPa
• Notched isode 37 J/m
• Thermal deflection temperature at 0.45 MPa 76 °C

Packaging:

• 1l

Designed for printing models of crowns and bridges with replaceable dies, Dental Model V2 is a resin with high precision and accuracy. Print the finest details down to 35 microns and removable stencils with a consistent fit. The smooth, matte surface finish and plaster-like color make it easy to switch from analog to digital model production.

Packaging:

• 1 liter

A resin with first class biocompatibility, intended for dentists to create precise surgical templates. Prints made of this material can be sterilized in an autoclave and are allowed to come into contact with skin and tissues. The material was created and rigorously tested to print precise templates and guides used in implant procedures. After final processing, prints made of this material can become fully transparent for better positioning.

Recommended printing on a layer of 100 or 50 micrometers (Form 2) and 100 micrometers (Form 3B).

Meets ISO standards:

• EN ISO 10993-5:2009 (non-cytotoxic)
• ISO 10993-10:2010/(R)2014 (non-sensitizing)
• ISO 10993-10:2010/(R)2014 (non-irritating)
• EN ISO 13485:2016
• EN ISO 14971:2012

Packaging:

• 1 liter

Class IIa biocompatible resin with high peel and wear resistance, making Dental LT Clear ideal for splints, attachments and other direct orthodontic devices. Thanks to the transparent color, high optical transparency is achieved for beautiful final products.

• The material has been assessed according to ISO 10993-1:2018.

Application:

• Occlusal splints.
• Retention appliances.
• Occlusal overlays.
• Surgical splints and guides.
• Fastening elements.
• Other orthodontic accessories.

Material properties:

• Bending modulus 2300 MPa.
• Elongation at break 12%.
• Shore hardness: 78D.
• Color transparent.

Packaging:

• 1 liter

First class biocompatible material (EN-ISO 10993-1:2009/AC:2010, USP Class VI), intended for dentists to create precision surgical guides, dental models or similar details.

Packaging:

• 1 liter

Resin for jewelry and dental prosthetics.

• Does not require light polymerization after printing.

The original Castable Wax Resin is intended for the production of lost models in foundry. The material contains 20% wax and, thanks to its properties, does not leave any residue after firing and reflects the contour of the form well. Suitable for precision casting, it allows you to reproduce complex surfaces without visible layer lines. After printing, the models do not require additional hardening.

Also recommended for dental prosthetics:

• Crowns.
• Bridges.
• Partial dentures.
• Skeletons.

Packaging:

• 1L

The printing material in SLA technology is a liquid photopolymer resin hardened with a laser beam. Formlabs standard materials are the most universal resins for all applications. Strandard resins maintain high model accuracy without the risk of losing strength. Stiffness, durability, the ability to produce advanced details and the final smoothness of the print contribute to the wide use of the resin both in various industries and in medicine.

Colors:

• Transparent (Clear)
• White
• Gray (Grey)
• Black

Application:

• Conceptual models and prototypes.
• Transparent elements.
• Models requiring a smooth surface.

Physical data:

• Tensile strength 63 PMa.
• Elongation at break 6%
• Shore hardness D75.
• Modulus of elasticity 2.2 GPa.

Packaging:

• 1l

Spare hoses for the resin pumping system. Over time, pump performance will deteriorate, resulting in longer filling times. The resin pumping system tubing should be replaced every 6 months or when the resin type changes. This kit includes both an internal tube for the resin pump and a transfer tube to connect the resin pump to the 5 liter resin container.

Packaging:

• 1 set of hoses

Light-curing resin for printing skeletons. It burns out without a trace. Red transparent color. The material is highly compatible: it can be used with all commercially available embedding materials.

Material data:

• Bending strength ≥ 100 MPa
• Elongation at Break 7.5% -11%
• Modulus of elasticity ≥ 2000 MPa
• Final hardness 80-90 Shore D.
• Color red transparent
• Viscosity <0.3 Pa · s

Packaging:

• 1 kg.

Light-curing resin for printing the gingival mask. Durable soft and flexible. Perfectly combined with models made of resins for models.

Material data:

• Final hardness approx. 70 Shore A
• Pink color
• Recovery after 100% deformation
• Viscosity approx. 2 Pa · s
• Bending deformation> 40%

Packaging:

• 1 kg.

Light-curing resin for the production of implant templates. Dimensionally stable and biocompatible.

Material data:

• Blue transparent color
• Modulus of elasticity> 1.700 MPa
• Bending strength ≥ 75 MPa
• Elongation at Break> 10-15%
• Final hardness> 80-85 Shore D.

Packaging:

• 1 kg.

Light-curing resin for the production of implant templates. Dimensionally stable and biocompatible. Blue transparent color.

Material data:

• Blue transparent color
• Modulus of elasticity> 1.700 MPa
• Bending strength ≥ 75 MPa
• Elongation at Break> 10-15%
• Final hardness> 80-85 Shore D.

Packaging:

• 1 kg.

Specially developed for the new generation of printers with 385 nm. Light-curing resin for the production of dental models for orthodontics and prosthetics. Faster printing process due to higher efficiency and precision. It is also suitable for printing expert and demonstration models.

Material data:

• Final hardness sdf
• Modulus of elasticity ≥ 1900 MPa
• Bending strength ≥ 85 MPa
• Beige colour
• Viscosity 0.8-1.2 Pa · s
• Elongation at break ≥ 8%

Packaging:

• 1 kg

Optimized, biocompatible resin for the production of dental impression trays. High reactivity with low viscosity. Simplified cleaning and improved mechanical properties. Twice as fast printing time, possible layer thicknesses of 300 μm. The finished impression trays have a homogeneous surface, which significantly reduces manual rework.

Printing time and material consumption

• Print speed (mm/h): 51
• Print time/platform (min): 82
• Print time/bucket (min): 5.1
• Buckets/Vertical Platform: 16
• Material consumption (g/spoon): 15
• Absolute height (mm): 70
• Cost /spoon approx (€): 2.49

Material data:

• Flexural strength > 75 MPa
• Elongation at break > 5%
• Modulus of elasticity ≥ 2,000 MPa
• Final hardness > 80 Shore D
• Green color
• Viscosity approx. 1 Pa·s

Packaging:

• 1 kg.

Light-curing resin for the production of orthodontic appliances. The configuration models are perfect for the thermoforming technique.

Material data:

• Final hardness approx. 80-85 Shore D
• The color of the corn is yellow
• Modulus of elasticity ≥ 2,000 MPa
• Viscosity 1.2 Pa · s
• Bending deformation ≥ 11-15%
• Bending strength ≥ 95 MPa

Packaging:

• 1 kg.

The material used for the production of temporary crowns, overlays, veneers and bridges in a natural enamel color. The material for printing requires the use of a stainless steel worktable. Supported layer height: 50 micrometers. Curing required.

Meets ISO standards:

EN ISO 10993-5: 2009 (non-cytotoxic)

ISO 10993-10: 2010 / (R) 2014 (non-irritating)

ISO 10993-10: 2010 / (R) 2014 (not sensitizing)

ISO 10993-3: 2014 (not genotoxic)

ISO 10993-1: 2009 (non-toxic)

Temporary CB resin is a medical device as defined in the EU Medical Device Directive (93/42 / EEC) and Chapter 201 (h) of the Federal Food Drug & Cosmetic (FD&C) Act. Restorations printed with CB provisional resin have been assessed according to ISO 10993-1: 2018 (Part 1: Assessment and testing as part of a risk management process) and ISO 7405: 2009 / (R) 2015 (Dentistry - Biocompatibility Assessment).

Technical data:

• Density: 1.4 - 1.5 g / cm3

  • Viscosity: 2500 - 6000 MPa * s

  • Bending strength (after hardening) 2,3,4: ≥ 100MPa

Package:

• 1l

Biocompatible resin for printing full dentures. Perfectly fitted dentures faster and cheaper. Long-term, biocompatible class IIa resins enable dentists and technicians to manufacture full dentures using 3D printing technology.

Denture Base resin has been tested and approved for use by: WuXi Apptec, 2540 Executive Drive, St. Paul, MN. The resins have received the biocompatibility class confirmed by the standards: EN-ISO 10993-1: 2009 / AC: 2010:

• Not mutagenic.
• Non-cytotoxic.
• It does not cause erythema or edema reactions.
• It is not allergenic.
• Does not cause systemic toxicity.

ISO standards for Denture Base: - EN-ISO 20795-1: 2013 (Dentistry - Base Polymers - Part 1: Denture Base Polymers)

Colors:

• LT (Light Pink)
• OP (Original Pink)
• RP (Reddish Pink)

• DP (Dark Pink)

• Supported layer height: 50 micrometers.

• Curing required.

Package:

• 1l

Light-curing resin for creating highly aesthetic temporary restorations (long-term temporary restorations)

Advantages:

• Material for 3D printers with a high filler content - especially useful for long-term restorations.
• High flexural strength and modulus of elasticity for stable provisional restorations.
• High abrasion resistance ensuring long use.
• Low water absorption and solubility for mechanical stability.
• Discoloration resistance - no discoloration after long use.
• Natural fluorescence – for high aesthetic requirements.
• Easy to process and polish.
• Composite material for printers – quick characterization and adaptation.

Indications:

• Long-term temporary prosthetic restorations, e.g. crowns, bridges and mock-ups.

Packaging:

• 500g

Product expiry date 05/11/2024

Material used for the production of temporary crowns, onlays, veneers and bridges in natural enamel color.

• The printing material requires the use of a stainless steel worktable.
• Supported layer height: 50 micrometers.
• Curing required.

Meets ISO standards:

• EN ISO 10993-5:2009 (non-cytotoxic)

• ISO 10993-10:2010/(R)2014 (non-irritating)

• ISO 10993-10:2010/(R)2014 (non-sensitizing)

• ISO 10993-3:2014 (non-genotoxic)

• ISO 10993-1:2009 (non-toxic)

Temporary CB Resin is a medical device as defined in the EU Medical Devices Directive (93/42/EEC) and Section 201(h) of the Federal Food Drug & Cosmetic (FD&C) Act. Restorations printed with temporary CB resin have been assessed in accordance with ISO 10993-1: 2018 (Part 1: Assessment and testing as part of the risk management process) and ISO 7405: 2009/(R) 2015 (Dentistry - Biocompatibility assessment).

Technical data:

• Density: 1.4 - 1.5 g/cm3
• Viscosity: 2500 - 6000 MPa*s
• Bending strength (after hardening) 2,3,4: ≥ 100MPa

Packaging:

• 1l

3D resin for printing dental models.

Colors:

• Beige.
• Grey.
• White.
• Super White.

DentaVision Form & Model resins are dedicated to printing dental models:

• Diagnostic models.
• Orthodontic models.
• Working models.
• Implant models.
• Show models.
• Models for thermoformable rails.

Technical data:

• Bending strength: 90+/- 5% MPa.
• Elastic modulus: 2600 +/- 5% MPa.
• Viscosity: 200+/- 5% cPs.
• Density: 1.15-1.18 g/cm3.

Advantages:

• Compatibility with open 385/405nm printer systems.
• Very good detail reproduction.
• Color stability.
• Dimensional stability after the polymerization process.
• Low viscosity.
• High durability.

COMPATIBLE PRINTERS:

• All with an open 385/405 nm material system, in particular:

• Phrozen Sonic Mini 4K

• Sonic Mini 8K
• Sonic Mighty 4K and others
• Anycubic Photon 4K, Mono X6K and others
• Asiga MAX385

Packaging:

• 1 kg