3D resin for printing dental models.

Colors:

• Beige.
• Grey.

DentaVision Form & Model resins are dedicated to printing dental models:

• Diagnostic models.
• Orthodontic models.
• Working models.
• Implant models.
• Show models.
• Models for thermoformable rails.

Technical data:

• Bending strength: 90+/- 5% MPa.
• Elastic modulus: 2600 +/- 5% MPa.
• Viscosity: 200+/- 5% cPs.
• Density: 1.15-1.18 g/cm3.

Advantages:

• Compatibility with open 385/405nm printer systems.
• Very good detail reproduction.
• Color stability.
• Dimensional stability after the polymerization process.
• Low viscosity.
• High durability.

COMPATIBLE PRINTERS:

• All with an open 385/405 nm material system, in particular:

• Phrozen Sonic Mini 4K

• Sonic Mini 8K
• Sonic Mighty 4K and others
• Anycubic Photon 4K, Mono X6K and others
• Asiga MAX385

Packaging:

• 200g

Professional UV resin intended for LCD, DLP and SLA printers. Low shrinkage and dimensional stability during printing guarantee that the final model will be characterized by high precision and clear details. Anycubic UV resins have a good combination of hardness and ductility, which ensures easy removal of supports and high mechanical strength. Anycubic DLP Craftsman is a new resin created for DLP printers. Even though the resin was developed for DLP technology, this does not mean that it cannot be used for standard SLA and MSLA printers, as the resin is still cured at a light wavelength of 365 - 405 nm. The resin has very low shrinkage and incredible precision, thanks to special ingredients such as microcrystalline ceramic powder. Additionally, Anycubic DLP Craftsman is perfect for quick printing.

Colors:

• White
• Gray
• Beige

Technical data:

• Tensile strength: 35-50 MPa
• Elongation: 8-12%
• Bending strength: 50-70 MPa
• Bending modulus: 1200-1600 MPa
• Shrinkage: 3.72-4.24%
• Hardness: 82 HD
• Viscosity: 150-250 mPa*s
• Density: 1.15-1.20 g/cm3

Packaging:

• 1 kg

Denture Base and Teeth resins have been tested and approved for use by: WuXi Apptec, 2540 Executive Drive, St. Paul, MN. The resins have received the biocompatibility class confirmed by the standards: EN-ISO 10993-1: 2009 / AC: 2010:

• Non-mutagenic. • Non-cytotoxic. • Does not cause erythematous or edema reactions. • Not sensitizing. • Does not cause systemic toxicity.

ISO standards for Denture Teeth:

• EN-ISO 22112: 2017 (Dentistry - artificial teeth for dentures) • Flexural strength, water absorption and water solubility in accordance with EN-ISO 10477 (Dentistry - Polymer-based crowns and veneering materials) type 2 class 2

Color:

• A1
• A2
• A3
• A3.5
• B1
• B2

Package:

• 1l

Permanent Crown resin is a dental, biocompatible material for 3D printing in SLA technology. The material in the natural color of tooth enamel is suitable for the production of permanent, full-contour prosthetic restorations. Permanent Crown resin is a hybrid material with a ceramic filling. The prints have a perfect fit, low water absorption and a smooth finish. Crowns made of this material have a low tendency to age, discolor or build up plaque. Permanent Crown resin is available in 4 VITA shades (A2, A3, B1, C2).

Application:

• Permanent single crowns.
• Cartridges.
• Inputs.
• Veneers.

Resin is a medical device as defined in the EU Medical Devices Directive (93/42/EEC) and Chapter 201(h) of the Federal Food Drug & Cosmetic (FD&C) Act. Restorations printed with temporary CB resin have been assessed according to ISO 10993-1:2018 (Part 1: Assessment and testing as part of the risk management process) and ISO 7405:2009/(R)2015 (Dentistry - biocompatibility assessment).

• Printing on a stainless steel build plate

Packaging:

• 1 liter

Resin for making models for crowns, models for bridges, models for aligners, prosthetic models, diagnostic models and implant models.

Benefits:

• the models are extremely hard after the printing and final exposure process
• available in Sand - "sand", Gray - "gray" and Night - "night"
• the resin has a low viscosity.
• faster printing process, easy cleaning and less material consumption
• precise printed and perfect reproduction of the smallest details
• The NYTE3D model has been specially developed for dental laboratories and can be used in devices with a wavelength of 385 nm and 405 nm. You are free to decide whether you will use the material in your LCD printer or DLP printer.

Technical data:

• 3.5% bending stress 65.7 ± 3.4 MPa
• Bending strength 71.2 ± 4.2 MPa
• Bending deformation 4.93 ± 0.13%
• Modulus of elasticity 2484 ± 145 MPa
• Shore D hardness 90 ± 1
• Viscosity 220 mPa · s
• Wavelength range 385-405nm

Package:

• 1 kg

Advantages:

• It burns out with almost no residue. This makes it perfect for all kinds of foundry indications.
• It can be used for works made of lithium disilicate.
• Very low expansion
• High model accuracy
• Short exposure times and high reactivity ensure precise printing and perfect reproduction of the smallest details

Technical data:

• 3.5% flexural stress 63.7 ± 2.9 MPa
• Modulus of elasticity 2498 ± 115 MPa
• Wavelength range 385-405nm
• Flexural strength 72.2 ± 3.2 MPa
• Shore D hardness 90 ± 1
• Flexural strain 5.03 ± 0.23 %
• Viscosity 220 mPa·s

Packaging:

• 1 kg

** Benefits:**

• the color of the resin faithfully reflects the color of the gums for a model that is perfectly suited to the job
• does not stick to the hand or model
• high tear strength
• the resin is soft and flexible, perfect for making implant models.
• it can be used in devices with a wavelength of 385 nm and 405 nm.

Package:

• 500g

01S is a beige dental model resin containing unique inorganic fillers to increase performance. Printed dental models have a matte surface with a plaster texture, which ensures precise scanning results. In addition, the resin material features accurate size, scratch-resistant surface, extremely low shrinkage rate and long-term stability, making it ideal for printing high-quality dental models. With the D01S you can create tooth models with confidence and precision.

Advantages:

• Very low shrinkage.
• High dimensional accuracy.
• Hard and wear-resistant surface.
• Matte surface and plaster texture.

Application:

• Working models.
• Implant models.
• Diagnostic models.

Compatible with 3D printers for UV resin 385-410nm DLP:

• All series of Anycubic, Asiga, Solus, Miicraft, Kudo3d, Flashforge, Makex, Shining etc.

Mechanical properties:

• ASTM Shore Hardness: D2240-05 92D.
• Tensile strength ASTM: D638-14 20MPa.
• Bending strength ASTM: D790-10 39MPa.
• Elongation at break ASTM: D638-14 5%.
• Viscosity (25℃) ASTM: D4212-10 1100mpa.s.

Packaging:

• 1 kg