Green melting wax.

Application:

• Making wax caps for modeling crowns and bridges using the soaking technique.
• Processing temperature 70–75 °C.

Packaging:

• 1pc/150g

Medium-hard, inorganic modeling wax for conventional crown and bridge techniques. Optimized for modeling with an electric wax knife.

Renfert catalog number 4950200

Characteristics:

• Opaque gray color.
• It allows for optimal operation at low temperatures and cools down very quickly.
• It achieves high modeling precision.

Packaging:

• 1pc/75g

GEO cervical wax, burgundy transparent.

Renfert catalog number 4861000

Characteristics:

• Wax for shaping the edges of crowns.
• Very little shrinkage, stable, can be applied precisely and thinly to the edge of the fitting.
• It has good surface treatment properties.

Packaging:

• 1pc/75g.

GEO-Dip yellow wax for the soaking technique.

Renfer catalog number 4823000

Characteristics:

• Wax for use in electric heaters.
• Produced in the form of practical granules.
• Thanks to its excellent quality and flexibility, it enables precise production of wax caps.

Packaging:

• 1pc/200g.

Crown wax.

Characteristics:

• High-quality modeling wax for crowns and bridges.
• Perfect scraping properties.
• Fast solidification after application.
• It can be easily shaped.
• Hard.
• Blue color.
• The solidification point of hard crown wax is approximately 61 °C.

Packaging:

• 70g.

SU UNDERLAY WAX cervical wax, orange.

Characteristics:

• Perfect for shaping the cervical edges of crowns and partial crowns.
• Soft casting wax almost completely free of shrinkage.
• Solidifying temperature 66 °C.

Packaging:

• 1pc/45g

Adhesive wax.

• Good bonding effect on all materials.
• Ideal for attaching retention or carrier elements, repair and soldering work.
• Melting point 71 °C.
• Red colour.

Packaging:

• 1 piece

Cervical wax, eggplant color.

Characteristics:

• Flexible, stress-free, soft and non-shrinking special wax for modeling the cervical edges of crowns, precision parts and inlays.
• Cervical wax burns without leaving any residue, making it also suitable for the ceramic pressing technique.
• It has a very low elastic limit, so any deformation has only a plastic effect. This allows for safe modeling of thin plates up to the preparation border.
• Freezing point approx. 62°C.

Packaging:

• 70g

Wax blocks for dipping.

• For making crown caps using the soaking technique.

Characteristics:

• Yellow super soft.
• Exact fit.
• The temperature of the wax ready for dipping is 85 - 90 degrees Celsius.
• Within 1 second of immersion, we will obtain a cap 0.4 mm thick.
• The solidification point of the wax is 74 degrees Celsius.

Packaging:

• 200 g

Green milling wax. This high-quality, medium-hard wax is used for modeling in the technique of making crowns and bridges.

Characteristics:

• This wax can be milled well.
• It does not smudge and retains its shape very well.
• It is the perfect wax for all types of combined work.

Packaging:

• 70g.

GEO Avantgarde Universal opaque wax - mint.

Medium-hard, inorganic modeling wax for conventional crown and bridge techniques. Optimized for modeling with an electric wax knife.

Renfert catalog number 4950300

Characteristics:

• For crown modeling.
• It allows for optimal operation at low temperatures and cools down very quickly.
• It achieves high modeling precision.

Packaging:

• 1pc/75g

GEO Classic transparent wax - mint.

Hard, organic wax with very good modeling and sculpting properties and very low shrinkage. No residue after firing.

Renfert catalog number 4971300

Characteristics:

• Wax intended for pressed ceramics.
• Contains a small amount of pigment.
• Burns 100% without residue.
• Low shrinkage thanks to microcrystalline structure.

Packaging:

• 1pc/75g.

Geo Classic mint opaque wax 75g

Hard, inorganic wax with very good modeling and sculpting properties and very low shrinkage. Suitable for conventional casting techniques.

Renfer catalog number 4970300

Characteristics:

• For modeling with Bunsen burners with very good tolerance to temperature fluctuations.
• It gives good results in modeling both crowns and bridges of various widths.
• All wax components burn completely.

Packaging:

• 1 pack/75 g.

GEO DIP green wax for the soaking technique.

• Soft, ready-to-use dip wax with minimal shrinkage for use in all crown and bridge techniques.

Renfert catalog number 4823300

Characteristics:

• Low copy shrinkage.
• For use in electronically stabilized melting vessels.
• The practical form of granules makes it easier to fill the melting vessel.
• Recommended temperature setting is 90 - 92 °C
• Repeatable, precisely fitting wax copies with uniform layer thickness.
• This thickness depends on the temperature.
• Great stability and flexibility.
• Does not contain acrylic additives.

Packaging:

• 1pc/200g

Dental occlusal wax, ideal for rational, aesthetic modeling of chewing surfaces.

Characteristics:

• It can be applied very well.
• Clear contours.
• Occlusive waxes do not discolor or stick.
• They burn without residue.

Packaging:

• 70g.

Medium-hard crown wax - dark blue.

Characteristics:

• High-quality modeling wax for crowns and bridges.
• Perfect scraping properties.
• Fast solidification after application.
• Can be shaped well.

Packaging:

• 70g

GEO Avantgarde opaque wax - beige.

Renfert catalog number 4950100

Characteristics:

• Wax intended for use with an electric wax cutter.
• For crown modeling.
• It allows for optimal operation at low temperatures and cools down very quickly.
• It achieves high modeling precision.

Packaging:

• 1pc/75g.

SU-MODELING WAX - blue modeling wax

Advantages:

• Particularly suitable for the design of chewing surfaces and modeling of crown walls, as well as for the construction of pontics for plastic and ceramic veneers.
• It is characterized by high surface density.
• The opaque and intense color of the wax allows easy recognition of contours during modeling.
• Melting point 64 °C.

Packaging:

• 45g.

GEO sticking wax adhesive wax, transparent pink.

Renfert catalog number 4881000

Special wax for attaching prosthetic elements, preparing repairs and soldering.

Advantages:

• Temperature range 85°C.
• Excellent adhesion to all dental materials.
• Thorough preparation for soldering and repairing dentures.
• Perfect for fixing and aligning casting channels and finished wax components.
• Very hard.

Packaging:

• 1pc/75g

GEO base and cervical wax - transparent red.

Renfert catalog number 4891000

Advantages:

• Temperature range 59 - 68 °C.
• Soft, slightly elastic and perfectly sealing cervical and foundation wax, used for precise modeling of crown edges.
• This wax is also suitable for lining small undercuts and recesses

Packaging:

• 1pc/75g.

Occlusive wax - gray, ideal for rational and aesthetic modeling of chewing surfaces.

Characteristics:

• Very easy to apply.
• The contours are clearly visible even when heated.
• Occlusive waxes do not discolor or stick.
• They burn without residue.

Packaging:

• 70g.

Elaflex Super flexible wax for crown caps

Benefits:

• Excellent adhesion precision and high flexibility both in the production of crown inlays and crown caps.

• Elaflex is so flexible that the seal does not change when the cap is removed and replaced on the stump.

• The wax is self-insulating on polished primary telescopic crowns.

Package:

• 130g

GEO Classic hard wax for milling, opaque blue.

Renfert catalog number 4851000

Characteristics:

• Adapted to mechanical processing with cutting and milling tools.
• Suitable for modeling the chewing surface.
• It does not stick when working at speeds between 2,500 and 5,000 rpm.

Packaging:

• 1pc/75g.

GEO Classic opaque wax - gray, for modeling with Bunsen burners, with very good tolerance to temperature fluctuations.

Renfert catalog number 4970200

Characteristics:

• Visible contours thanks to low translucency.
• It shapes very well thanks to its plastic properties.
• It cuts very well.

Packaging:

• 1pc/75g.

Organic, transparent modeling wax, suitable for use with a flame torch and electric wax cutter. High precision and accuracy thanks to low shrinkage. No residue after firing.

Renfert catalog number 4750100

Technical data:

• Recommended temperature setting is 115–135 °C
• Melting range 66–76 °C
• Green color.
• Hardness - medium hard.

Advantages:

• Very easy modeling and sculpting achieved by coordinated material properties.
• Low wax shrinkage ensures high precision and accuracy of fit.
• Smooth modeling of objects thanks to a small melting temperature range.

Packaging:

• 80g.

Organic, transparent modeling wax suitable for use with a flame torch and electric wax cutter. High precision and accuracy thanks to low shrinkage. No residue after firing.

Renfert catalog number 4750200

Technical data:

• Recommended temperature setting is 115–135 °C
• Melting range 66–76 °C
• Blue color.
• Hardness - medium hard.

Advantages:

• Very easy modeling and sculpting achieved by coordinated material properties.
• Low wax shrinkage ensures high precision and accuracy of fit.
• Smooth modeling of objects thanks to a small melting temperature range.

Packaging:

• 80g

Organic, transparent modeling wax, suitable for use with a flame torch and electric wax cutter. High precision and accuracy thanks to low shrinkage. No residue after firing.

Renfert catalog number 4750300

Technical data:

• Recommended temperature setting is 115–135 °C
• Melting range 66–76 °C
• Red colour.
• Hardness - medium hard.

Advantages:

• Very easy modeling and sculpting achieved by coordinated material properties.
• Low wax shrinkage ensures high precision and accuracy of fit.
• Smooth modeling of objects thanks to a small melting temperature range.

Packaging:

• 80g

Inorganic, opaque modeling wax, suitable for use with a flame torch and electric wax knife. High precision and accuracy thanks to low shrinkage.

Renfert catalog number 4750400

Technical data:

• Recommended temperature setting is 115–135 °C
• Melting range 66–76 °C
• Beige colour.
• Hardness - medium hard.

Advantages:

• Very easy modeling and sculpting achieved by coordinated material properties.
• Low wax shrinkage ensures high precision and accuracy of fit.
• Smooth modeling of objects thanks to a small melting temperature range.

Packaging:

• 80g

Inorganic, opaque modeling wax, suitable for use with a flame torch and electric wax knife. High precision and accuracy thanks to low shrinkage.​ Renfert catalog number 4750500

Technical data:

• Recommended temperature setting is 115–135 °C
• Melting range 66–76 °C
• Grey colour.
• Hardness - medium hard.

Advantages:

• Very easy modeling and sculpting achieved by coordinated material properties.
• Low wax shrinkage ensures high precision and accuracy of fit.
• Smooth modeling of objects thanks to a small melting temperature range.

Packaging:

• 80g.

GEO Snow - white waxes are white, medium-hard waxes for modeling functional wax-ups in an articulator on various frameworks. It burns without residue and is an inorganic wax.

Renfert catalog number 4990101

Advantages:

• Quick and precise white wax up on situational or master models, necessary for functional work planning.
• A very narrow melting temperature range and low shrinkage allow for quick and precise modeling.
• Very good modeling and sculpting properties achieved by coordinated material properties.

Packaging:

• 1pc/75g

Wax spans set. 18 forms of 10 pieces.

• Ready-made wax shapes for porcelain structures save time and burn without residue.

Packaging:

• 180 pcs.

GEO Snow - white waxes are white, medium-hard waxes for modeling functional wax-ups in an articulator on various frameworks. It burns without residue and is an organic wax.

Renfert catalog number 4990201

Advantages:

• Quick and precise white wax up on situational or master models, necessary for functional work planning.
• A very narrow melting temperature range and low shrinkage allow for quick and precise modeling.
• Very good modeling and sculpting properties achieved by coordinated material properties.

Packaging:

• 1pc/75g

Wax blocks for making caps for crowns, using the soaking technique.

Characteristics:

• Green soft.
• Exact fit.
• The temperature of the wax ready for dipping is 85 -90 °C.
• Within 1 second of immersion, we will obtain a cap 0.4 mm thick.
• The solidification point of the wax is 74 °C.

Packaging:

• 200g.

GEO Classic Natural dentine opaque wax.

Hard wax for aesthetic planning of prosthetic restorations - wax-ups.

Renfert catalog number 4990300

Characteristics:

• The translucency and color of A2 dentine give the modeled work a very realistic look.
• They burn without residue and are the optimal choice for all-ceramic and pressed porcelain work.

Advantages:

• Patients can get a true picture of their subsequent prosthetic restorations.

Packaging:

• 1pc/75g

GEO Classic wax, transparent blue. The wax is suitable for modeling with Bunsen burners thanks to its very good tolerance to temperature fluctuations.

Renfert catalog number 4971200

Characteristics:

• It shapes very well thanks to its plastic properties.
• It cuts very well.
• Thanks to the hard, inelastic structure of the wax, it is ideal for modeling chewing surfaces.

Packaging:

• 1pc/75g.

GEO Classic meringue opaque wax.

The wax is suitable for modeling with Bunsen burners thanks to its very good tolerance to temperature fluctuations.

Renfert catalog number 4970100

Characteristics:

• Clearly visible contours.
• It shapes very well thanks to its plastic properties.
• It cuts very well.
• Thanks to the hard, inelastic structure of the wax, it is ideal for modeling chewing surfaces.

Packaging:

• 1pc/75g.

Modeling wax.

Characteristics:

• Green color.
• Medium hard.
• Due to its low hardness, this wax is characterized by better resistance to cracking and can be used in all foundry procedures.
• Melting point 57°C

Packaging:

• 45g

CAD/CAM modeling wax.

Advantages:

• Reflection-free wax suitable for all laser scanning systems.
• Pleasant pastel color (pastel-blue, pastel beige, lilac, gray)
• Can be milled.
• Very opaque.
• Low shrinkage.
• For modeling and blocking.
• Melting point 51°C.

Packaging:

• 45 g.

Wax for modeling chewing surfaces.

Characteristics:

• Solidification temperature 61°C.
• Gray color, hard.

Packaging:

• 45 g

Medium-hard gray modeling wax.

Advantages:

• Very good liquidity..
• Organically dyed
• For use on inlays and crowns.
• Translucent in the liquid phase, i.e. the coagulation phase is clearly perceptible during modeling.

Packaging:

• 45 g

Extremely hard milling wax, resembling acrylic.

• Blue color.

Packaging:

• 45g

Hard, transparent modeling wax for incisal areas based on the philosophy of August Bruguera. No residue after firing.

Renfert catalog number 6340200

Recommended temperature setting:

• 115 – 140°C

Packaging:

• 1pc/40g

Mop wax blocks specially developed for press ceramics. Orange color.

Advantages:

• shape memory wax.
• bio - organically colored
• solidification point 64 degrees ° C.

Package:

200 g

Modeling wax for crowns and bridges, ideal for pressed porcelain. Light blue color.

Advantages :

• solidification point 64 degrees ° C.
• colored organically
• very clearly visible details of the modeling room.

Package:

45 g

Undercoating and cervical wax from the new CERAMO line, ideal for pressed ceramics. Orange color.

Advantages:

• low shrinkage
• flexible
• shape stability
• bio organically colored.

Package:

45 g

A set of modeling waxes GEO Classic, Avantgarde and special waxes.

Renfert Catalog Number 4930004

Packaging:

• GEO Classic mint-transparent - 20g
• GEO Classic Natural dentin opaque - 20g
• GEO Classic Avantgarde gray opaque - 20g
• GEO Classic Snow-white opaque, - 20g
• GEO Classic Milling wax blue opaque - 20g
• GEO Classic Cervical and foundation red-transparent - 20g

GEO Classic Natural dentin transparent wax.

Wax for aesthetic planning of prosthetic restorations - wax-ups.

Renfert catalog number 4990400

Characteristics:

• The translucency and color of A2 dentine give the modeled work a very realistic look.
• They burn without residue and are the optimal choice for all-ceramic and pressed porcelain work.

Advantages:

• Patients can get a true picture of their subsequent prosthetic restorations.

Packaging:

• 75 g

A set of waxes for making monolithic, diagnostic and aesthetic wax-ups, single crowns and entire bridges according to the philosophy of August Bruguera.

Renfert catalog number 6340001

Advantages:

• Easily restore natural tooth colors and shapes with August Bruguera's guide.
• Fast and clean modeling of wax-ups with modeling waxes and waxes for special effects.
• Precise modeling of the smallest structures such as nodules and mamelons is possible thanks to the balanced flow and solidification time of the wax with its optimal stability.

Application:

• Monolithic and diagnostic wax-up
• Aesthetic, identical to natural wax-up
• Individual characterization of the tooth color of Wax-up
• All-ceramic restorations and pressed ceramics
• Conventional crowns and bridges.

Packaging:

• 4 x 40 g GEO Expert - sculpture / dentin / enamel / translucent
• 4 x 4 g waxes for special effects - white, orange, blue, brown
• Aesthetic stand with a transparent cover and a modeling guide according to Audust Bruguera.

GEO Expert cervical A. Bruguera. Aesthetic, low-elastic cervical wax with a red-orange color of the tooth neck based on the philosophy of August Bruguera. It can also be used to seal and block underpasses.

Renfert catalog number 6340500

Advantages:

• Organic wax that burns without residue.
• Fine modeling of the preparation boundaries achieved thanks to very good adaptability and sculpting properties.
• Precision and accuracy of fit of restorations, achieved thanks to low wax shrinkage.

Packaging:

• 40g

Tension-free, flexible, medium-hard, special wax for cervical areas. High precision and accuracy thanks to low shrinkage and slightly elastic consistency of the wax. No residue after firing.​ Renfert catalog number 4750600

Technical data:

• Recommended temperature setting is 120–155 °C
• Melting range 57–68 °C
• Color - transparent red.
• Hardness - flexible, medium hard.

Advantages:

• Perfect for modeling the edges of crowns and bridges, as well as for lining recesses and sealing.
• For modeling traditional crowns and bridges, as well as for solid and pressed ceramics.

Packaging:

• 80g