Durable resin (v2) simulating the properties of polypropylene (PP) is intended for products exposed to friction and wear. Thanks to its low modulus, high elongation and high impact strength, Durable resin prints are smooth, shiny and have good deformation strength. Use this material for applications that require minimal friction.

Packaging:

• 1000 ml

Gel, despite its stickiness, spreads easily over the surface and forms a thin layer after drying. STRATOGEL acts as a separating film between the 3D resin and acrylic resin. The product has the right viscosity, effective with just one layer. However, a second layer can be applied when dealing with rougher surfaces (printed models larger than 100 microns). The first layer must be completely dry. The plastic layer is easily removed with water and a brush. STRATOGEL comes off without residue, does not damage acrylic and 3D resin, does not change the properties of resins. It is safe and does not contain any toxic substances.

Benefits:

• Easy application: a single layer is applied with a brush.
• Creates a very thin insulating layer.
• Does not contaminate 3D resin or acrylics.
• Easily removable with water.

Directions for use:

• Apply a few drops directly from the bottle to the dry model and spread it evenly with a brush.
• For quick drying, it is recommended to dry the gel with compressed air at low pressure for 30 seconds, air drying for 30 minutes.

Package:

• 100 ml

SIMPLEX is a dental 3D filament printer. With Slicer software, which was developed specifically for the dental industry, you can print models easily and reliably thanks to the "Plug and Print" concept. The SIMPLEX 3D-filament-printer system covers the entire scope of producing orthodontic models. Thanks to high dimensional accuracy, the SIMPLEX 3D filament printer provides consistent and repeatable results. The produced 3D models do not require post-processing.

Advantages:

• Easy to use thanks to the "Plug and Print" concept.
• Level resolution of up to 50 µm ensures precise results.
• Pleasant operation with low noise level ≤ 49 dB.

Details:

• Process reliability thanks to fiber monitoring system and automated troubleshooting.
• Intuitive navigation on the touch screen.
• Safety thanks to a closed compartment, lockable door and removable cover.
• Heated work table: optimal grip and easy cleaning.
• Simple operation thanks to the removable printing platform.
• Optimal communication between computer and printer via Wi-Fi (currently EU and USA).
• Working with fibers that are harmless to health.

Packaging:

• 1 piece

Soft tissue starter pack.

• Thanks to the Soft Tissue Kit, you can print elements imitating soft tissues. The material is used to print flexible gingival masks for use in conjunction with rigid dental models to aid in the planning of implant procedures. The Soft Tissue set consists of a flexible base resin (Flexible 80A) and pigments that allow you to obtain various degrees of color saturation, from dark to light pink shades. Magenta pigment, yellow pigment and white pigment can also be purchased separately.

Packaging:

• 1set

Light-cured resin, with ceramic filling for 3D printing. For the production of permanent crowns, inlays, onlays, veneers, prosthetic teeth and long-term temporary crowns and bridges. For DLP printers with a wavelength of 385 nm. Does not contain MMA and THF-MA. Class IIa medical device.

Advantages:

• Very high resistance to breakage and abrasion.
• Natural translucency and opaqueness.
• Easy to grind and polish.
• High biocompatibility.
• No discoloration thanks to low water absorption.
• Long-term color stability.
• Excellent bond with classic dental cements.

Physical data:

• Bending strength > 115 MPa.
• Elastic modulus > 2800 MPa.
• Final hardness > 50 Barcol.
• Water absorption at 40 g/mm3.
• Solubility 7.5 g/mm3.

Packaging:

• 500g

Phrozen Sonic XL 4K 2022

Compact LCD desktop printer with 52 µ accuracy and high light intensity for fast printing times. The high-quality all-metal housing, heated workspace and easy handling of the cuvette make the Phrozen Sonic XL a user-friendly 3D printer for all dental applications.

Color:

• Red.
• White.

Phrozen Sonic XL 4K 2022 printer optimized by Dreve specialists for printing precise dental models. You can print them quickly and conveniently on a large-format construction board. The 3D printer is supplied with Dreve ElementS software, which facilitates the user's work thanks to a friendly interface.

The Phrozen Sonic XL 4K printer, version 2022, is delivered to the user fully calibrated and ready for operation, all that is required is to connect it and you can start printing (plug & play).

We offer professional technical and substantive support.

Sonic XL 4K 2022 is also equipped with a heating and air purification system to improve the printing process.

Characteristics:

• Print volume: 200 x 125 x 200 mm

• 4K resolution

• The LCD display offers incredible ultra-high resolution printing of 3840 x 2160 with a resolution of 52 µm XY.

• 9.3 inch printing area;

• With a 9.3-inch LCD printing area, the Sonic XL 4K 2022 display is much larger than traditional LCD printers.

• Monochrome LCD screen

• Sonic XL 4K 2022 prints up to five times faster than conventional 3D printers, and it only takes about a second to print a layer.

• Solid construction

• The 3D printer is made of aluminum and is designed for a precise, quiet and smooth printing process.

• Large touch screen

• Printing status can be monitored at all times and the printer can be easily managed via the 5-inch touchscreen.

• 12-month warranty. The exception is the LCD screen as a wearing part. There is a 3-month warranty here.

Packaging:

• 1 piece.

Resin bathtub.

Packaging:

• 1 piece.

FEP blank

Packaging:

• 1 piece

Model BioDent® 385 nm

The BioDent® model is a light-curing resin consisting of 50% renewable raw materials. The properties of the material are ideal for the production of models (also in Aligner). The FotoDent® bio-based model can be cleaned using the FotoClean program.

Advantages:

• less pollution in the atmosphere
• free of carcinogenic materials
• shorter cleaning times

Material data:

• Color beige opaque
• Modulus of elasticity ≥ 2200 MPa
• Viscosity ~ 0.6 Pa · s
• Bending strength ≥ 95 MPa

Packaging:

• 1 kg bottle.

Designed for crown and bridge models with replaceable dies. Dental Model Resin is a very precise resin with high accuracy.

Version 3:

• This version of Model Resin is a reformulation of the previous version.
• With the new V3 resin, you can print even more accurate models in half the time.
• Supports print resolutions: 100 and 50 microns.
• Requires Form 3 Resin Tank V2.1 or later for Form 3B and Form 2 Resin Tank LT for Form 2.

Packaging:

• 1l

SIMPLEX model isolation, Isolator for 3D printed models from resins and filaments.

Renfert catalog number 17350010

Thanks to the ready-to-use agent, you can easily and safely make orthodontic appliances from dental resin on a printed model. Apply a thin layer of the agent using a brush. Once dry, this layer creates a clear insulation between the printed model and the dental acrylic.

Advantages:

• Suitable for use with models printed from 3D filament and resin.
• Intended for isolating models in the production of removable orthodontic appliances.
• Also suitable for models made using the SLA/DLP printing process.
• One application is enough to achieve optimal separation of the model from the workpiece.
• The agent can be easily removed with water and does not require steam cleaning.
• It does not contain substances harmful to health.

Packaging:

• 1pc/80g

Light-curing resin for the production of denture bases. The material provides accurate results with exceptional dimensional stability. The FotoDent® prosthesis is MMA free and has a stable color.

Material data:

• Final hardness 80 Shore D.
• Modulus of elasticity> 2000 MPa
• Bending strength> 80 MPa
• Viscosity 0.4-0.6 Pa · s
• Pink transparent color.

Packaging:

• 1 kg

Thanks to our many years of experience and cooperation with leading manufacturers of solutions for dental prosthetics, we have developed a new product for you:

EcoPrint: a system for economical printing of prosthetic models thanks to which:

• You can print 6 models in up to 30 minutes.
• You will achieve printing precision in 12K resolution.
• You will optimize the costs of your business - the cost of printing a model is approximately PLN 6.
• You will have the opportunity to print skeletal dentures.

The system includes:

• Reconfigured printer - before delivery to your studio, each EcoPrint printer is reconfigured to meet the highest quality standards set for printers for precise prosthetic models.

• Wash&Cure 2.0 washing and polymerization device - thanks to the use of this device, you can be sure that the printed models will undergo the appropriate post-processing procedure.

• 2 kg of resin for EcoPrint Craftsman DLP models (beige color) - this is the resin we chose due to its unrivaled parameters (accuracy, sharp contours, printing speed).

• Work accessories - everything you need to print your models right after receiving the EcoPrint set (cuvette, strainer for pouring resin, tweezers, masks, LCD thermometer/hygrometer)

• Free implementation of the system in your studio/office - our consultant is waiting for your call, implementation will take only 30-45 minutes and thanks to it you will avoid failures and ensure excellent results already in the first prints. Dental tech. Patryk Baszuk will be happy to answer all your questions and help you run the EcoPrint system, patryk.baszuk@mikran.com tel. 798 748 738

• Free after-sales support during the warranty period.

• Post-warranty service.

• Voucher for a free design of a frame denture in Exocad (we will design a frame denture for you free of charge and you can print and cast it)

• 10% discount on Exocad courses offered by our Digital Training Laboratory.

EcoPrint advantages:

• Low system price.
• Very low operating costs (approx. PLN 6 for the model).
• You will achieve printing precision in 12K resolution.
• High repeatability of results.
• Professional implementation and after-sales support.

Packaging:

• EcoPrint 3D printer + starter kit.

The next-generation precision model printing resin, developed to take advantage of the new Form 4 ecosystem, is a high-accuracy material. Creates beautiful models with clear edges thanks to high opacity, beige color and smooth, matte finish.

Precision Model Resin is the next generation of model resin for the new Form 4 series of printers to print three times faster while offering improved accuracy and aesthetics.

Advantages:

• Prints eight models in just 90 minutes.
• 5-minute cycle in the washer.
• 5-minute hardening at room temperature.

Compared to Model Resin V3, Precision Model Resin is:

• Greater accuracy - better resolution and consistency of small elements.
• Speed - Designed to take advantage of the new Form 4 ecosystem for three times faster printing.
• A more opaque and matte aesthetic to better show off the edges.

Packaging:

• 1l

Light-curing, flexible resin for 3D printing. For making flexible splints, repositioners, mouth guards, splints and bite plates. Biocompatible. For DLP printers with a wavelength of 385 nm. Class IIa medical device.

Advantages:

• Very high wearing comfort.
• No stress.
• Long-lasting durability and stability.
• High impact resistance.
• Easy to maintain, clean and polish.
• No MMA, THF-MA and TPO.
• Odor and taste neutrality.

Physical data:

• Tensile strength > 40 MPa.
• Elongation > 20%.
• Tear strength > 140 N/mm.
• Final hardness > 75 Shore D.
• Water absorption < 32 µg/mm³.
• Solubility < 5 µg/mm³.

Packaging:

• 1000g

Light-curing, very flexible 3D printing resin. For making flexible splints, repositioners, mouth guards, splints and bite plates. Biocompatible. For DLP printers with a wavelength of 385 nm. Class IIa medical device.

Advantages:

• Very high wearing comfort.
• No stress.
• Long-lasting durability and stability.
• High impact resistance.
• Easy to maintain, clean and polish.
• No MMA, THF-MA and TPO.
• Odor and taste neutrality.

Physical data:

• Tensile strength > 25 MPa.
• Elongation > 50%.
• Tear strength > 110 N/mm.
• Final hardness > 65 Shore D.
• Water absorption < 32 µg/mm³.
• Solubility < 5 µg/mm³.

Packaging:

• 1000g

Light-curing, biocompatible resin for printing temporary crowns and bridges.

Advantages:

• Light spectrum 385 nm.
  • Exceptional resistance to cracking and bending.
  • High abrasion resistance.
  • Natural tooth aesthetics, shiny, translucent colors.
  • Easy surface treatment and polishing, which can be characterized individually with composites.
  • Low viscosity ensures low material consumption and faster cleaning.
  • Resistant to conditions in the oral cavity, no odor and taste irritation.
  • Class IIa medical device.
  • Colours: A1, A2, A3.

Packaging:

• 500g

Light-curing, biocompatible resin for 3D printing, for the production of implant guides, transfer keys and occlusal splints.

Advantages:

• Light spectrum 385 nm.
• Transparent formula for visual control in the workspace.
• Process reliability due to high initial hardness and final strength.
• Low viscosity ensures low material consumption and faster cleaning.
• The highest mechanical resistance to bending and cracking.
• Odor and taste neutral.
• Class IIa medical device,
• Colour: transparent.

Packaging:

• 500g

Light-curing resin for 3D printing for dental models.

Advantages:

• For DLP printers with a wavelength of 385 nm.
• Maximum surface hardness and dimensional stability ensure excellent mechanical load capacity.
• Faster workflow without drying process.
• Maximum design precision, feel and stability meet the high demands of model production.
• Optimum edge strength ensures reliable models.
• Colors: sand, light grey, caramel, white.

Physical data:

• Flexural strength > 80 MPa;
• Elastic modulus > 1700 MPa;
• Final hardness > 80 Shore D.

Packaging:

• 1000g

Light-cured 3D resin for producing precise casting objects (skeletons).

Advantages:

• For all UV printers with a light spectrum of 385 nm.
• Excellent dimensional stability after printing ensures safe application with fit control, especially for cast models and molds.
• Printing results are precise and distortion-free, even for extremely delicate and complex models.
• Any corrections or repairs after printing are possible using easyform gel LC.
• Low viscosity and optimized cure depth help reduce printing time and material consumption and facilitate faster cleaning.
• It burns without leaving any residue in the mold and is the basis for high-quality modeling results that ensure a perfect fit.
• Red colour

Packaging:

• 500g or 1000g

The Form 4 work platform has a durable aluminum surface. A spare platform can speed up your workflow and allow for uninterrupted printing, whether you're changing resins or starting a new print.

Packaging:

• 1 piece

EcoPrint printer cover mounted on the LCD screen to protect against spilled resin and mechanical damage. Thanks to this, scratches, cracks and other damage will not appear on the screen. The cover has high light transmittance, so the prints are precise and accurate.

Packaging:

• 5 pcs

Resin tank foil for Anycubic EcoPrint.

Characteristics:

• Size 278 x 190mm.
• Thickness 0.3mm.
• Permeability 92%.
• ACF foil type.

Advantages:

• Suitable for fast printing.

Attention:

• The foil is a consumable part and must be replaced if it is deformed or damaged during printing.
• The foil should be replaced immediately if any signs of deformation or excessive adhesion occur.

Packaging:

• 1 piece

Resin tank foil for Anycubic EcoPrint.

Characteristics:

• Size 278 x 190mm.
• Thickness 0.3mm.
• Permeability 92%.
• ACF foil type.

Advantages:

• Suitable for fast printing.

Attention:

• The foil is a consumable part and must be replaced if it is deformed or damaged during printing.
• The foil should be replaced immediately if any signs of deformation or excessive adhesion occur.

Packaging:

• 2 pcs

Light-curing resin for printing thermoelastic, therapeutic dental splints.

Indications:

• Therapeutic splints.

• Diagnostic auxiliary and functional elements.

• Teeth whitening trays.

• Palatal plates.

Advantages:

• High flexibility and abrasion resistance - exceptional break resistance and durability.

• Excellent comfort of use, the material is thermoelastic and tasteless and odorless.

• Transparent – for making rails that are almost invisible.

• Easy to polish.

• Biocompatible.

• Class IIa medical device.

Packaging:

• 1000g

Light-curing resin for printing removable denture plates.

Indications:

• Removable denture plates

Advantages:

• Class IIa medical device

• Comfort of wearing the prosthesis – thanks to precision of workmanship and perfect fit.

• High aesthetics – natural gingival color.

• Compatibility – use with available lining materials.

• Safe removal from build platform.

• Patient acceptance - no taste or smell.

• Biocompatibility.

Packaging:

• 1000g

Finish your prints quickly and easily with the versatile Form 4 Finishing Kit to keep your workspace clean and tidy. Includes two rinsing containers, rinsing basket, resin removal tool, plastic tank scraper, construction platform tool, cutters, squeeze bottle and disposable nitrile gloves.

Packaging:

• 1 set

Light-curing resin for the production of trial prosthetic restorations.

Indications:

• Trial full and partial dentures.

• Transfer and sanding templates.

• Corrective and occlusal impressions.

Advantages:

• Preliminary inspection before making the final prosthesis - checking and, if necessary, adjustment and correction of occlusion, function, pronunciation and aesthetics.

Packaging:

• 1000g

Form Wash automatically cleans printed items thoroughly and effectively using IPA (isopropyl alcohol) or alternative solvents.

• Prints can be transferred directly on the build platform from the printer to Form Wash or removed and placed in the washing basket.
• Prints are precisely and thoroughly mixed in the solvent using a rotor, thanks to which every corner and crevice is perfectly clean.
• Once washing is complete, Form Wash automatically lifts the models from the IPA to dry.

Packaging:

• 1 piece

The Form 4B 3D printer is another proposition from Formlabs. Never before has the dental and medical industry had access to such a combination of quality, speed and user experience in the desktop printer segment.

Formlabs Form 4B with new LFD™ technology

The Form 4B printer works with the newly patented Low Force Display™ technology. It operates on the basis of six advanced print control systems, a new resin container with a dosing system and a larger printing platform than in previous models. The dimensions of the new work platform are 200 × 125 × 210 mm, which is 30% more than before.

Printing speeds of up to 100 mm/h deliver ready models in less than 2 hours. A 50 micron pixel is used for maximum dimensional accuracy.

The Form 4 3D printer is a solution designed for the dental and medical industries. Form 4B supports all materials available for Form 4 engineering printing, plus dental, medical materials and biocompatible resins. A wide selection of materials will be used in the everyday work of dental technicians, dentists and medical research laboratories. The combination of the speed of new LFD technology, high-quality print surfaces and specialized materials expands the possibilities for digital medicine and dentistry. From medical scan to printout in 2 hours? - from now on it is possible with the new Form 4B printer.

The most important benefits of the new Form 4B series compared to previous models:

• New 3D printing technology – Low Force Display™
• Save time - print parts up to 5 times faster.
• Cheaper operation - lower costs of resin tank with extended service life and reduced cost of basic materials by 27%
• Larger work area – work platform increased by 30% with dimensions of 20×12.5×21cm.
• Greater dimensional accuracy – new optical engine.

Technical Specifications:

• Technology: Low Force Display™ (LFD)
• Working area: 20.0 × 12.5 × 21.0 cm
• Layer thickness: 25 – 300 microns
• XY resolution: 50 microns
• Average printing speed: 40 mm/h
• Maximum printing speed: 100 mm/h
• Resin tank life: 75,000+ layers with any Formlabs material
• Printer weight: 18.3 kg
• Printer dimensions: 39.8 × 36.7 × 55.4 cm
• Warranty and service: 1-year warranty included
• Paid service and extended warranty options: available

• Accepted file types: STL, OBJ, 3MF

  Packaging:

• 1x printer

• 1x Resin Tank form 4B
• 1x form 4B work platform
• 1x Mixer form 4B
• 1x Finish kit
• 1x Dental service plan 1 year, 2 years or 3 years

The Form 4 resin mixer improves material efficiency by maintaining the uniformity of the resin in the tank during the printing process. A mixer is required for every printing. For convenience, we recommend having one resin mixer per tank.

Packaging:

• 1 piece

BioMed Durable Resin is a transparent material for biocompatible applications requiring impact, shatter and abrasion resistance.

This USP Class VI material is manufactured in an FDA, ISO 13485 registered facility and can be used in long-term skin contact and short-term tissue, bone and dentin contact applications.

Resin dedicated to Form 3B series 3D printers. is compatible with the Form 3B, Form 3B+ and Form 3BL models and can be used in medical facilities for the production of devices and instrumentation as well as in dental and orthodontic laboratories.

To ensure that physicians and manufacturers can rely on this new material for patient contact, Formlabs has closely followed USP Class VI procedures to obtain certification for use in long-term skin applications (over 30 days) and short-term tissue, bone and dentin contact applications (less than than 24 hours). Formlabs' manufacturing facility meets the requirements of the ISO 13485 standard and strict quality control measures are rigorously enforced.

Technical data:

• Highest tensile strength - 29.1 MPa.
• Modulus of elasticity - .99 GPa.
• Elongation at break - 33%
• Impact resistance (Notched Izod) - 98 J/m.

Packaging:

• 1 liter

Ultrasonic cleaner and UV lamp for printed models.

Technical Specifications;

• Control method: digital tube, LED indicator, control knob
• Rated power: 40W
• Input voltage: AC110 / 240V 50 / 60Hz
• UV light length: 405nm
• Time selection: 1-60 min
• Machine Size: 290mm (L) * 270mm (W) * 479mm (H)
• Washing Basket Size: 192mm (L) * 120mm (W) * 290mm (H)
• Maximum size of object to be cured: 190mm (D) * 245mm (H)
• Libra; ~ 6.5 kg

Package:

• 1 piece

Formlabs resin pump.

The resin pumping system for Form 3 series stereolithography (SLA) 3D printers smoothly delivers resin from a 5 liter resin package through the pumping system directly to the printer tank. Reduce waste by 86%.

Packaging:

• 1 piece

A cover mounted on the LCD screen to protect against spilled resin and mechanical damage. Thanks to this, scratches, cracks and other damage will not appear on the screen. The cover has high light transmittance, so the prints are precise and accurate.

Packaging:

• 5 pcs

Each resin tank includes a reusable lid that makes it easy to stack the tanks and store the resin outside the printer. With a separate tank for each color or type of resin, changing materials is as easy as inserting a new tank.

Resin tanks provide consistent performance for at least 75,000 layers of printing (typically 1-2 years for the average user).

Packaging:

• 1 piece

Resin tray 25x35x5cm.

Packaging:

• 1 piece

Convenient strainer for draining the remaining resin after printing.

Packaging:

• 1 piece.

Thermometer and humidity sensor.

Thanks to this device, it is possible to measure the environmental conditions in which e.g. resin for 3D printers and many other materials sensitive to humidity and temperature are stored and used.

Technical data:

• Product type: Temperature and humidity sensor.
• Connectivity: Bluetooth 4.2 LE.
• Power: CR2032 battery.
• Rated voltage: 2.5V - 3V.
• Humidity range: 0%~99%RH.
• Temperature range: 0ºC ~ 60ºC.
• Material: ABS, PMMA.
• Certifications: QB/WSDJ 2401-2019.
• White color.
• Dimensions: 43x43x12.5mm.
• Additional information: Temperature display every 0.1ºC, Humidity display every 1% RH

Packaging:

• 1 piece

Biocompatible Class I resin, for orthodontic applications.

Digitally designed transfer splints enable precise transfer of several brackets to an ideal, virtually pre-determined position on the teeth. This allows not only for more accurate placement, but also for a more effective treatment procedure.

Indications:

• Orthodontic transfer splints for installing brackets.

Advantages:

• Easy to use.
• The translucent V-Print IBT is flexible and allows for easy application and removal of the splint in the patient's mouth.
• No shaking - ready for immediate use.
• Virtually planned brackets are precise, glued safely and faster.

Packaging:

• 1000g

Light-curing resin for the production of therapeutic splints.

Indications:

• Medicinal splints.
• Auxiliary parts and functional parts for diagnosis.
• Whitening trays.

Advantages:

• Class IIa medical device.
• Biocompatibility and neutral taste ensure a high level of patient acceptance.
• The wavelength of 385 nm allows for aesthetic, clear and transparent printing.
• High bending strength.
• High precision and, consequently, accurate fit ensure high wearing comfort.

Packaging:

• 1000g

Resin tank for the Mars 4 Ultra printer.

Packaging:

• 1 piece

Light-curing resin for the generative production of individual trays, base plates and occlusal templates.

Indications:

• Individual impression trays, functional impression trays.
• Occlusal template plates and trial dentures.
• Short circuit registration.

Advantages:

• Time savings - ability to print with high layer thicknesses (up to 200 µm).
• Impressions free from distortions – thanks to high durability.
• Universal – suitable for all types of impression materials.
• Speed and efficiency – printing various elements, e.g. shaping the margins, making retention elements or recesses for implant impressions.

Packaging:

• 1000g

The multi-purpose SIMPLEX filament provides a natural surface effect thanks to the high content of hard gypsum. It offers high detail reproduction. It promotes pleasant work because it does not contain irritating ingredients. It does not produce unpleasant fumes during the printing process and is recyclable and industrially compostable. It can be easily prepared using rotary instruments or a scalpel. Printing temperature: 205-220°C

Data:

• Gypsum fiber Ø 1.75 mm
• 1 x 800 g
• White color

ACF foils for the Mars 4 Ultra printer.

Packaging:

• 5pcs/1pack

The special SIMPLEX aligner filament is adapted to the special requirements of aligner production and thermoforming techniques. It promotes pleasant work because it does not contain irritating ingredients. It does not emit unpleasant fumes during the printing process. No post-processing, no annealing. Printing temperature: 235-255°C

Details:

• Heat-resistant special filament Ø 1.75 mm,
• 1 x 800 g
• White color

Packaging:

• 1 piece

• SIMPLEX filament for working models, provides high detail.
• It promotes pleasant work because it does not contain irritating ingredients.
• Does not produce unpleasant fumes during the printing process,
• Suitable for recycling and industrial composting.
• Printing temperature: 190-230°C

Details:

• Biofilament Ø 1.75 mm,
• 1 x 800 g,
• green color

The filament for the demonstration model made of SIMPLEX biofibers offers high detail reproduction and sharpness of diagnostic models. It promotes pleasant work because it does not contain irritating ingredients. It does not produce unpleasant fumes during the printing process and is recyclable and industrially compostable. Printing temperature: 190-230°C

Details:

• Biofilament Ø 1.75 mm,
• 1 x 800 g,
• White color

Packaging:

• 1 piece

LCD screen for the Mars 4 Ultra printer.

Packaging:

• 1 piece

F80 is a soft and flexible resin, pink in color, particularly suitable for creating models of dental gums. F80 resin can maintain its softness even at lower temperatures.

Advantages:

• F80 resin prints have a Shore hardness of 50-60A, are soft to the touch and flexible.
• F80 resin prints are characterized by good elasticity and quickly regain their shape after deformation.
• Even at temperatures below 10°C, F80 prints remain soft, although their flexibility decreases as the temperature drops.
• F80 resin is suitable for all popular LCD/MSLA/DLP 3D printers on the market, including RGB or monochrome printers.
• Printer Compatibility - All series of Anycubic, Asiga, Solus, Miicraft, Kudo3d, Flashforge, Makex, Shining etc. 385-410nm DLP UV resin 3D printer.

Mechanical properties:

• ASTM Shore Hardness: D2240-05 50-60A.
• Tensile strength ASTM: D638-14 3.8 MPa.
• Tear strength ASTM: D624-98 9.75 KN/m.
• Elongation at break ASTM: D638-14 159%.
• Viscosity (25℃) ASTM: D4212-10 2300mpa.s.

Manufacturer's recommendations:

• If the resin will not be used in the 3D printer for more than 1 day, it is recommended to filter the resin using a funnel with a filter and pour it into an empty container. Do not pour the resin from the tank back into the original bottle to avoid contamination with other resins.

Packaging:

• 500g